AC equip alternator bracket

[73charger440]

Ok I'm trying to get this 440 done and can not find the correct combination of brackets or pulleys does anyone know the alternator brackets I need to still have air. And what pulleys I need I think I bought the wrong alternator bracket I think

[BLK 68 R/T]

There are quite a few combinations of pulleys and brackets depending on the year. Here is one option for the alternator bracket/belt tensioner setup.



Along with the alternator brackets you will need a 4 groove crank pulley, a small single groove WP pulley, dual groove pulley alternator. and if you have PS, the stock 69-71 Saginaw style pump should fit.
Are you going to be running factory a/c or a complete aftermarket setup? If aftermarket, then you don't need any of the stuff above, a stock setup for a non a/c car will work, unless you want it to have a factory look to it.

[Nacho-RT74]

For the alt just need the triangular one on top and the large L shaped what attachs between the water pump housing and engine mount bolt for firmlesss when AC is turned on, aside of the bolts and spacers on left. Small shield on left is to protect the heater hoses from Compressor/alt hoses rubbing when these slaps

Iddler pulley setup on right is for 72 and earliers water pump belt. 73 and lates gets the water pump belt set with the steering pump.

[Nacho-RT74]

Then also the theated bracket what attaches to head, but thats on both AC and non AC cars, and this is diff on B and RB on blocks due the diff height of block.

Will try to attach a pic later