Looking for a clamp

[GT]

I give up.  I've been searching for decent looking clamps with an ID of 3".
I would like to find billet/aluminum, but heck, as long as it looks good I'll take what i can get.

It needs to have a flat surface for mounting and be split to mount a tube in it.

Here are pictures of what I am looking for... the 3" ID part is what is hard to find:

[lukedukem]

looks like a pipe mounting collar
http://www.staffordmfg.com/Product-Super-Categories/Pipe-Mounting-Collars
Just a smaller base
Google pipe mounting collar and look at the first couple images.
Not an exact match, but stylish
Luke

[keepat]

Try searching under fire extinguisher aluminum clamps, see link below
Pat


http://www.xtremeledlights.com/product_p/xt-fe3.htm

[WHITE AND RED 69]

How about this? Comes in a few other colors as well.

http://www.jegs.com/i/CSR/170/651C/10002/-1

[GT]

Thanks Pat - those fire extinguisher clamps should work!

I have a pair of the red CSR ones shown - but they won't work because it isn't a split design (its slip over).