Anyone replaced the O rings in the brake dist. block?

[b5blue]

I am going to be benching my distribution block soon for line fitting removal. Is it serviceable to take the unbalance indicator apart to replace the tiny O rings?

[fy469rtse]

Neal,
Photos pal, search my threads on this , I had a lot of trouble with this part,
Get the exact replacement oring kit
Bronze washer under the head of one bit if same unit as mine

[terrible one]

Yep they are serviceable. I got my o-ring kit from musclecarresearch.com and here is a link to the combination valve I did; the drum block should be even easier : http://www.dodgecharger.com/forum/index.php?topic=109298.0

[b5blue]

Here's the thing torn apart....https://musclecarresearch.com/1970-71-mopar-brake-tube-tee-autopsy   THANKS! 

[b5blue]

Here is the kit...   https://musclecarresearch.com/mopar-brake-tube-tee-kit-1     Perfect, thanks again!

[b5blue]

Ordered with 2 day shipping for just under 18.00 awesome, thanks a third time! 

[Nacho-RT74]

soon to be done by me...

I got however once a rebuilt unit by a seller... nicelly paint and all, but didn't work. Brake fluid didn't want to run to rear line

[b5blue]

  I had a similar problem with rear lines.  My parts are delayed, vendor is out of town till the weekend. I wish I'd thought to ask about this sooner. I can not think of any other parts in the brake system or suspension that will not be new or near new.   

[terrible one]

No problem at all, I'm glad I can pass the knowledge on!  I was very surprised to find someone that had went to the trouble to produce the kits and I agree the price is more than reasonable. Good luck!

[b5blue]

I can't imagine how you found it but glad you shared.