69 charger 440 motor mounts

[tiki]

anyone have any links to a strong set of motor mounts 

[don duick]

go to the engine section and look at heading 5th down (broken engine mounts heres the fix) you only need a strong mount on the drivers side

[fy469rtse]

Don you referring to Rons engine mount bolt fix, yes works , ?
And cheap too , it's got a sticky ,

[tiki]

Thank-You that looks like it could help still need to buy a set

[RGA]

I have a stroker that kept ripping mounts, put some solid mounts in it. No more problems, no vibration either which I thought was weird. Figured I would have some vibration issues with the solid mounts.

[don duick]

Don you referring to Rons engine mount bolt fix, yes works , ?
And cheap too , it's got a sticky ,

yes.

I did this to my left mount and when watching my car on the dyno the engine was revved to 4800 and lifted up a noticeable amount. I cant understand how it lifted so much with a solid bolt in the mount. Had me worried a bit at first and had me wondering if a standard mount would have survived. 

[Dino]

I got a stock mount, made in India, and put a torque chain on it as my old mount was ripped in half. 

[Back N Black]

I used a torque strap in the link below:
http://www.engine-swaps.com/Pages/ProductsType/TorqueStraps.html

[moparnation74]

I have the Schumacher Poly locs on mine.  A bit pricery but worth it.

[lukedukem]

I used a torque strap in the link below:
http://www.engine-swaps.com/Pages/ProductsType/TorqueStraps.html

Me too

Luke

[TUFCAT]

Those mounts solve the "excessive torque" problem quite nicely....but $160 for a set of mounts is more than a bit pricey, especially for a street car.  

[GreenMachine]

Thank-You that looks like it could help still need to buy a set

Start with these, they'll work for 1966-72 B Bodies. If you need the brackets too, Ebay is a good source.

http://www.summitracing.com/parts/ani-2250

[don duick]

Thank-You that looks like it could help still need to buy a set

Start with these, they'll work for 1966-72 B Bodies. If you need the brackets too, Ebay is a good source.

http://www.summitracing.com/parts/ani-2250

$3.97 ? this cannot be correct. I paid $50. for one mount. (Australia) and back in about 1985 when big block Chrysler parts were rare and hard to find I paid $100 for one mount. Which for me at the time was half of one weeks pay.

[fy469rtse]

Mother #%£¥er, always the way
Whenever I restore a part or do it the hard way, it always gets reproduced or like these , the bolts I bought , damn could have bought a couple sets of these

[fy469rtse]

More composed now ,
Yes use these , these will hold big block stroker , just ask Ron

[GreenMachine]

More composed now ,
Yes use these , these will hold big block stroker , just ask Ron

http://www.summitracing.com/parts/ani-2250


These are just the standard mounts, they would still have to be modified like in Ron's thread......


http://www.dodgecharger.com/forum/index.php/topic,13216.0.html

[TUFCAT]

These anchor mounts are made in Korea. Yes, Anchor is a US company in Ohio....and yes, that pisses me off. 

That's why they're $3.97. I'd pay 4-5 times that price for a good quality USA made mount (like the factory installed mounts from Ma Mopar 45-50 years ago).