What size torque convertor on dur276 284 440

[73charger440]

What size torque convertor would be best to use on a 440 60 over edelbrock alum 84cc heads 276 284 cam
https://www.lunatipower.com/CamSpec.aspx?p=60304

[c00nhunterjoe]

What gears? I would say a set of 3.91's and a 10" converter would be pretty snappy in that setup.

[68r/t]

I've just installed that cam in a 440 with stealth heads and 3.55s, I put 2500 stall  in mine but Lunati recommends a 2800.
I will be firing it up on Saturday for the first time with the cam and heads so I will report back on how it goes.

[73charger440]

Sounds good thank you