Engine bay vacuum hose/harness clips

[Dino]

I know this was discussed before but I can't find the post.

Does anyone reproduce the clips you tape the vacuum hoses and headlight harness to?  There are two that go on top of the inner ds fender.  If not, is there anything out there that looks like it and does the job?

[Ghoste]

Charger Specialties?

[Dino]

I looked on all sites but did not find them.   

[Ghoste]

Penstar?  I think thats the name, they're always at that Michigan swap meet in January with Mopar specific fasteners and clips.  There is also that place that does the gaskets and body plugs, Detroit Performance Technology?  Something like that.  Might they have them?

[Dino]

Good idea!  I'll give those guys a call.   

[tan top]

  not seen them anywhere , although  that was a long time ago when I was looking ! , was lucky enough to be able to reuse  my originals  ( second & third picture ),

think you could make sutable replacements that would work  out of the oem plastic wire straps see picture below , think the altered ones A would not  work because hole in inner fender too big  

[Just 6T9 CHGR]

The same guy selling the vacuum hoses Gotham City Muscle Cars is in the process of reproing them.....

[green69rt]

These what you're looking for??

https://www.hooverautoparts.com/index.php?cruising=products&category=Electrical&subcategory=Wire%20Strap%20Kits

[Hard Charger]

the t clips are available, I got them recently.

Mr Mopar or Mega parts has them. you need 3.

[Charger-Bodie]

I have a stash of clips for this,but they are the Xmas tree style post instead of the two sided hook type. They work perfect. Unless going for concourse they are fine. Now, if correct one sod become available I will buy those.

[Charger-Bodie]

Here is a link to the ones I have.

http://www.ebay.com/itm/Plymouth-Dodge-Chrysler-Desoto-wiring-harness-clips-/140544359359?pt=Motors_Car_Truck_Parts_Accessories&hash=item20b918bbbf&vxp=mtr559637014142

[Dino]

Thanks all, Bodie those would work for me, my car is too far from stock now anyway, I just want something to hold the harness and vacuum lines in place.  I guess I'll have some spares.   

These what you're looking for??

https://www.hooverautoparts.com/index.php?cruising=products&category=Electrical&subcategory=Wire%20Strap%20Kits

No those I have, it's just the t-shaped ones I need.

the t clips are available, I got them recently.

Mr Mopar or Mega parts has them. you need 3.

That's embarrassing, I never heard of Mr. Mopar....  I did check megaparts and did not find them.

The same guy selling the vacuum hoses Gotham City Muscle Cars is in the process of reproing them.....

Good to know.  Last year one of the vacuum hoses snapped so I temporarily fixed it with a hose splice connector.  I'd like to get a new set one day so that'll work out when I can order all of it at once.