Heat/ac box. Can it be removed with dash frame still installed?

[white]

Hello I am getting my charger ready for a rebuilt motor to be installed in 1 month. I am cleaning and repairing anything that I can while motor is out. I would like to remove the ac/heater box assembly under the dash frame but not sure if it can be done with the dash assembly in. Any help would be great. Thank you.

[TUFCAT]

Yes it can be done (I assume its a 2nd gen you're working on).  Its obviously easier with the dash and glass removed but its not necessary. Maybe the service manual can help you.

[Ghoste]

It sure can.  Its another of those contortionist jobs but it can certainly be done.

[b5blue]

Not "hard to do" just a lot of stuff to pull. A/C ducts, glove box, control connections, under hood stuff and so on.

[white]

 I have a 1969 charger. Thanks for your help, You guy's are great. Will start on it next week.

[NHCharger]

Remove your front seats, at least the passenger side. Much easier working up under the dash.

[timmycharger]

Remove your front seats, at least the passenger side. Much easier working up under the dash.

[A383Wing]

take the console out also..

[tan top]

Remove your front seats, at least the passenger side. Much easier working up under the dash.

take the console out also..

yep Deffo take out console