News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Parking brake assembly removal

Started by Evolution69, January 11, 2014, 11:59:48 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Evolution69

January 11, 2014, 11:59:48 AM
Hi guys, How does the parking brake assembly from the drivers side footwell come out on a 68 Charger? Thank you for your time.
Matching numbers 1968 Dodge Charger RT

"Because bad guys always drove Chargers" - Richard Hammond

bill440rt

#1
January 11, 2014, 12:39:57 PM
It's just bolted to the hinge pillar, and there are more bolts in the fenderwell area (I think 2).
Once loose, the cable needs to be disconnected at the clevis.
Pretty simple removal procedure.  :yesnod:   :cheers:
"Strive for perfection in everything. Take the best that exists and make it better. If it doesn't exist, create it. Accept nothing nearly right or good enough." Sir Henry Rolls Royce

Evolution69

#2
January 11, 2014, 01:04:51 PM
Yes I saw the 2 bolts in the fenderwell. I shall give it a go tomorrow, thank you very much Bill  :2thumbs:
Matching numbers 1968 Dodge Charger RT

"Because bad guys always drove Chargers" - Richard Hammond

bill440rt

#3
January 11, 2014, 01:12:27 PM
 :2thumbs:
"Strive for perfection in everything. Take the best that exists and make it better. If it doesn't exist, create it. Accept nothing nearly right or good enough." Sir Henry Rolls Royce
Print
Go Up Pages1
User actions