Changed the tie rod ends, now the car pulls a bit to the right

[MaximRecoil]

Despite my best intentions, I must not have gotten them screwed back into the adjusting sleeves exactly the same as they were. Should I try lengthening the passenger-side tie rod (by unscrewing one of the passenger-side tie rod ends a couple turns), or should I try shortening the driver-side tie rod, or both?

[A383Wing]

take to alignment shop and let them do it...you do not have any way of measuring correct toe-in with what you have in your tool box. One thread off one way or another will cause rapid tire wear either way

Bryan

[JB400]

You can get it close by measuring at a predetermined spot on the tires with a tape measure and adjusting your tie rods, but like has been said, take it to an alignment shop.