News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Hemi intake Id/date?

Started by ws23rt, May 24, 2013, 01:38:49 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

ws23rt

May 24, 2013, 01:38:49 PM
This manifold has two part numbers on it. I have an old manual that refers to pn 2780542. This has 543 and 544
It appears to be one for when they bolted at the engine block area. Oh and it has shelf abuse but not broken.

Oops I think I put this topic in the wrong place.

John_Kunkel

#1
May 24, 2013, 02:16:24 PM

542 is the part number, 543 and 544 are the casting numbers (they're seldom the same). The DPCD casting is supposed to be '66 and '67 while the '68-'71 have the Pentastar. '66 was supposedly the only year with the bolt holes to the block.  :shruggy:
Pardon me but my karma just ran over your dogma.

ws23rt

#2
May 24, 2013, 02:22:38 PM
Quote from: John_Kunkel on May 24, 2013, 02:16:24 PM

542 is the part number, 543 and 544 are the casting numbers (they're seldom the same). The DPCD casting is supposed to be '66 and '67 while the '68-'71 have the Pentastar. '66 was supposedly the only year with the bolt holes to the block.  :shruggy:

I thank you for that info. So this is a 66. :2thumbs:

Mytur Binsdirti

#3
May 24, 2013, 08:02:38 PM
Looks like it was dragged behind a car.

ws23rt

#4
May 24, 2013, 08:45:23 PM
It could be. Or the engine fell out of a pick up.
Print
Go Up Pages1
User actions