News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Trouble changing passenger side engine mount on 440....

Started by RECHRGD, April 18, 2013, 02:00:11 PM

Previous topic - Next topic
Print
Go Down Pages 1 2 All
User actions

RECHRGD

#25
April 23, 2013, 07:00:13 PM
OK, got it done.  Two new mounts with the bolt mod on the drivers side.  Trying to tighten a couple of the bolts and nuts were a project own their own.  Thanks for all the help guys!   
13.53 @ 105.32

mauve66

#26
April 23, 2013, 07:06:02 PM
whew :cheers: :cheers:
Robert-Las Vegas, NV

NEEDS:
body work
paint - mauve and black
powder coat wheels - mauve and black
total wiring
PW
PDLKS
Tint
trim
engine - 520/540, eddy heads, 6pak
alignment

Brightyellow69rtse

#27
April 25, 2013, 04:57:40 PM
i had a bad set of mounts. the holes wernt even close to being in the right position.
Print
Go Up Pages 1 2 All
User actions