68 charger with amnesia build

[moparstuart]

A sheet metal brake would help you out a bunch, even if you went to HVAC place and had your pieces bent.

I know, hell i theres an autoshop across the street (literally) i could take it to and build the whole thing, but my boss would likely have a heart attack if i showed up with this thing , especially without wheels, so, i'll spare him the trouble... for now 

dont let the nay sayers get you down , keep up the good work   

[Baldwinvette77]

A sheet metal brake would help you out a bunch, even if you went to HVAC place and had your pieces bent.

I know, hell i theres an autoshop across the street (literally) i could take it to and build the whole thing, but my boss would likely have a heart attack if i showed up with this thing , especially without wheels, so, i'll spare him the trouble... for now 

dont let the nay sayers get you down , keep up the good work   

Will do 

[dyslexic teddybear]

I like it.

Saving a Mopar is a wonderful thing.

Doing it with skill and very little $$$$.....even better.

[Baldwinvette77]

I like it.

Saving a Mopar is a wonderful thing.

Doing it with skill and very little $$$$.....even better.

I like the way you think 

And for a dyslexic Stuffed animal you are pretty good with words 

[dyslexic teddybear]

Thanks to spell-check and proofreading.

A lotta [expletive deleted] proofreading.

[Old Tired Rebel]

Oh this is going to be great to follow.

[Baldwinvette77]

Oh this is going to be great to follow.

are you actually interested or are you just hoping something terrible is going to happen? 

[Daytona R/T SE]

Just a tip:

Before doing any more welding/patchwork on that car, I'd get it all leveled up and sitting straight with the world...

And bolt the doors on and get them fitting right.

Just a tip from a guy who has saved rusted junk that should have been mashed

[Homerr]

Have you checked out what your state requires to get a VIN?
Have you checked if you can insure this car with more than just collision?

[Baldwinvette77]

Just a tip:

Before doing any more welding/patchwork on that car, I'd get it all leveled up and sitting straight with the world...

And bolt the doors on and get them fitting right.

Just a tip from a guy who has saved rusted junk that should have been mashed

I know, i was gonna get to that eventually, but before i throw the doors on i need to fix some rust spots on them, which i was actually going to start tomorrow, after that, ill fix some cracks in the glass fenders, bolt on the trunk,fix a rust spot on the trunklid, fix the caster wheel mounts, etc. 

[Baldwinvette77]

Have you checked out what your state requires to get a VIN?
Have you checked if you can insure this car with more than just collision?

I have checked about the vin requirements, if you're interested you can check it out here http://www.canadianrodder.com/features/fyi/registering.htm

Or you know what here ya go:
Rebuilt Vehicle:
Constructed using various main component parts (body, chassis or frame) obtained from other vehicles or from auto wreckers, dealers or manufacturers, and whose vehicle identification number (V.I.N.), make, model or model year has been affected by this reconstruction. Rebuilt vehicles are registered in Ontario as:
V.I.N.: Of body of the vehicle (CHASSIS/FRAME V.I.N. is not used). If there is no longer an existing V.I.N. on the dashboard, you may request the licence issuing office to provide you with a ministry - assigned as RBT V.I.N., which you should affix to the dashboard. A V.I.N is needed before you can obtain a Safety Standards Certificate.
MAKE: Manufacturer of body of the vehicle (CHASSIS/FRAME manufacturer is not used)
MODEL: RBT
MODEL YEAR: Year that the motor vehicle car was rebuilt and registered with the ministry

about insurance, no, it's hard to get insurance quotes for a car that technically doesn't exist, but i'll defiantly research it  

[Fred]

Your not Moparmanjim are you? 

[Fred]

Your not Moparmanjim are you? 

Depends, is he awesome, if so, totally am, if not... totally not 

I'd stick with "totally not" if I were you.       

[Darkman]

This looks like it will be a creative and custom build.

Can't wait to see the results! 

[Baldwinvette77]

This looks like it will be a creative and custom build.

Can't wait to see the results! 

Me either, Who knows what it will be!

And who is this moparmanjim guy? sounds like an urban legend 

[Fred]

And who is this moparmanjim guy? sounds like an urban legend  

Believe me when I say............in this case, ignorance is bliss!  

[Baldwinvette77]

And who is this moparmanjim guy? sounds like an urban legend  

Believe me when I say............in this case, ignorance is bliss!  

Yup, urban legend 

[NHCharger]

Wow. I have to say us Charger guys are gluttons for punishment when it comes to saving Chargers. Here's to saving another one 

[Baldwinvette77]

Wow. I have to say us Charger guys are gluttons for punishment when it comes to saving Chargers. Here's to saving another one 

won't be a showroom correct example, but it will kick ass all the same 

[Patronus]

Dad gum! You gots some pieces going on there! Keep account, n' plenty o wire. Gonna be some tappy-tap. 

[Baldwinvette77]

Dad gum! You gots some pieces going on there! Keep account, n' plenty o wire. Gonna be some tappy-tap. 

I can almost smell it 

[Old Tired Rebel]

Dad gum! You gots some pieces going on there! Keep account, n' plenty o wire. Gonna be some tappy-tap. 

I can almost smell it 

Amazing

[Darkman]

won't be a showroom correct example, but it will kick ass all the same 

Just between you and me.....who needs another showroom build. They are getting boring 

We need more like you that aren't afraid to make a car the way they want and laugh off the criticism 

[Baldwinvette77]

won't be a showroom correct example, but it will kick ass all the same 

Just between you and me.....who needs another showroom build. They are getting boring 

We need more like you that aren't afraid to make a car the way they want and laugh off the criticism 

I appreciate that   

[Fred]

won't be a showroom correct example, but it will kick ass all the same 

Just between you and me.....who needs another showroom build. They are getting boring 

We need more like you that aren't afraid to make a car the way they want and laugh off the criticism 

  Dead on.  It's your Charger, you need to do whatever makes you happy.