News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Ummmm.... ford mustang superbird daytona anyone??

Started by Hemi Runner, February 19, 2013, 08:46:59 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

rainbow4jd

#1
February 19, 2013, 09:21:35 PM
I...................................................................................... don't think so.

Charger-Bodie

#2
February 19, 2013, 09:38:12 PM
Is it a steel nose cone? Or some kind of homemade deal?
68 Charger R/t white with black v/t and red tailstripe. 440 4 speed ,black interior
68 383 auto with a/c and power windows. Now 440 4 speed jj1 gold black interior .
My Charger is a hybrid car, it burns gas and rubber............

Hemi Runner

#3
February 19, 2013, 10:13:51 PM
kinda looks like steel fenders with a fiberglass nose bonded to them??? If I lived in Georgia, had a mustang and $600, I'd find out :smilielol:

A383Wing

#5
February 20, 2013, 03:15:21 PM
obviously doesn't go fast enough to require the tire clearance fender scoops  :nana:

odcics2

#6
February 20, 2013, 04:46:51 PM
Quote from: A383Wing on February 20, 2013, 03:15:21 PM
obviously doesn't go fast enough to require the tire clearance fender scoops  :nana:

Or fast enough where air management is most important!   :nana: :nana: :nana: :nana: :smilielol:
I've never owned anything but a MoPar. Can you say that?

mauve66

#7
February 20, 2013, 06:38:31 PM
dragstrip car doesn't need clearance for the tire going into a corner, there are no corners............
Robert-Las Vegas, NV

NEEDS:
body work
paint - mauve and black
powder coat wheels - mauve and black
total wiring
PW
PDLKS
Tint
trim
engine - 520/540, eddy heads, 6pak
alignment

squeakfinder

#8
February 20, 2013, 07:24:52 PM


     :scratchchin:   62 mustang prototype.

     Not quite the same.   
Still looking for 15x7 Appliance slotted mags.....

squeakfinder

#9
February 20, 2013, 07:31:28 PM


     I don't know, fenders look kinda similar.
Still looking for 15x7 Appliance slotted mags.....

surmanajaja

#10
February 22, 2013, 02:59:03 PM
I have an old magazine of the car that had these, and it sure didnt look "right" :brickwall:

ACUDANUT

#11
February 22, 2013, 05:50:11 PM
Can anyone help me visualize a 64-66 mustang with this nose on it ?

JB400

#12
February 22, 2013, 06:07:01 PM
Quote from: ACUDANUT on February 22, 2013, 05:50:11 PM
Can anyone help me visualize a 64-66 mustang with this nose on it ?
Do you want nightmares?

ACUDANUT

#13
February 22, 2013, 06:11:54 PM
Why not, have enough already.

JB400

#14
February 22, 2013, 06:20:55 PM
 :eek2:

Here's a website where a guy took one and stuck a early hemi in it.  http://hemistang.com/

mauve66

#15
February 22, 2013, 08:54:28 PM
the front looks like one of those ice cream scoop/ladles they have at the local coldstone creamery :scratchchin:
Robert-Las Vegas, NV

NEEDS:
body work
paint - mauve and black
powder coat wheels - mauve and black
total wiring
PW
PDLKS
Tint
trim
engine - 520/540, eddy heads, 6pak
alignment

ACUDANUT

#16
February 22, 2013, 11:40:46 PM
Man that does look bad.  :rotz:

6PakBee

#18
March 02, 2013, 04:06:08 PM
Quote from: ACUDANUT on February 22, 2013, 05:50:11 PM
Can anyone help me visualize a 64-66 mustang with this nose on it ?

I'd have to get some "mass quantities" for both of us.  Lots of "mass quantities". 

ACUDANUT

#19
March 02, 2013, 05:05:24 PM
How about a 71-74 Mach 1 daytona ?
Print
Go Up Pages1
User actions