News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Need help identifying parts...

Started by Back N Black, October 17, 2012, 06:50:17 PM

Previous topic - Next topic

Back N Black

I have a few mopar parts that i can't identify. I think they are 70 parts.


tsmithae

#3 is, I believe the motor mount for the headlight motor
Check out my full thread and progress here.

http://www.1970chargerregistry.com/mboard/index.php?topic=119.0

Just 6T9 CHGR

#9 is the '70 only vacuum operated A/C heater control valve, the solenoid assy for the A/C blend doors on the under dash heater box & the A/C expansion valve (or part of it)
Chris' '69 Charger R/T


Indygenerallee

Sold my Charger unfortunately....never got it finished.

bill440rt

Most of that stuff is for '70.

1) Not sure.
2) Front bumper rubber stops that go behind the '70 front bumper, mounts to the inside of the fenders.
3) Headlamp motor bracket
4) Broken off grille bracket.
5) Same as #4.
6) ??
7) ??
8) Cruise switch for I dunno.
"Strive for perfection in everything. Take the best that exists and make it better. If it doesn't exist, create it. Accept nothing nearly right or good enough." Sir Henry Rolls Royce

HeavyFuel

Quote from: Just 6T9 CHGR on October 17, 2012, 07:09:37 PM
#9 is the '70 only vacuum operated A/C heater control valve, the solenoid assy for the A/C blend doors on the under dash heater box & the A/C expansion valve (or part of it)

Yes....I knew that one.  :coolgleamA: 

'68 A/C boxes had a similar part.