Rusty 68 rear window area

[The SDI]

Group,

I need your feedback based on experience. Please see the attached picture and tell me if this much sheet metal rust around the back window can be repaired. Or.......is it a waste of time?

Thanks,

[Ryan]

Absolutly.
Looks like you would want to replace the entire panel behind the rear window. It's available from AMD.
The sail panel is also repairable. You maybe able to find a good used piece. Would hate to have to buy a full quarter just for the sail panel.

What's the rest of the quarter panel look like?

[NHCharger]

Never mind the quarter panel. What's the rest of the car look like
Man, that is painful to look at. I agree with Ryan, no way to repair, buy some fresh replacement metal. I'm working on a 68 right now. Had a few small rust areas. By the time you cut the bad metal back to some solid metal the hole is 3x bigger. 

[The SDI]

The inside is completely rusted out. It will need new quarters, floor boards, sails, and frame.

[Indygenerallee]

The inner structure (pinchweld area) sheetmetal is not available through any company, you would have to find those pieces off a donor or fab them, I had to make the lower inner corner pieces for mine and mine did not look anywhere as near as bad as that.

[lukedukem]

is that a Chefmate meat thermometer. sweet

luke