High voltage cables 440

[Sruba]

Hi I am finishing my 440 engine and I don't know where install the Mounts of the high voltage cables. I have 3 mounts. First is easy. It is on the right from distributor. It is hold by screw (bolt) I can put on that 4 cables. Second one is very  similar. i can put there 3 cables .Third is 15-20 cm long and i can put there from left side 3 cables and from right side 2 up and 2 down. If someone can sent me the photo of engine and marker where. I just want to rebuild like he was made in factory. sorry for mistakes. Help the friend from Europe.Thanks

[b5blue]

The other two mount to the front bolt of the exhaust manifolds, they hang down and point in. There is one other that goes on the passenger side at the rear for that sides rear spark plug. It is a small steel one that holds a plastic insulator for just that one cable that comes from the dist. down between the valve cover and intake manifold and around the rear of the head by the transmission.  (Here we call these cables "spark plug wires".) Think of these as holding the spark plug wires close to the corners of the front of the block and you will see they are right and left oriented, each will only fit proper on it's correct side.

[gtx6970]

1


2

[b5blue]

Wow nice pics!  More brackets then I've ever seen! 

[Sruba]

Wow it is great ! Thx very much  for help. I own you a beer when you will be in Capitol of Poland