News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Neutral Switch wiring pigtail

Started by jaak, May 05, 2012, 07:57:11 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

jaak

May 05, 2012, 07:57:11 PM
Does anyone make a new pigtail for the neutral safety switch? Mine doesn't fit tight, and falls off the switch occasionally.

Jason

Rolling_Thunder

#1
May 05, 2012, 09:38:15 PM
1 or 3 pin ?
1968 Dodge Charger - 6.1L Hemi / 6-speed / 3.55 Sure Grip

2013 Dodge Challenger R/T - 5.7L Hemi / 6-speed / 3.73 Limited Slip

1964 Dodge Polara 500 - 440 / 4-speed / 3.91 Sure Grip

1973 Dodge Challenger Rallye - 340 / A-518 / 3.23 Sure Grip

jaak

#2
May 05, 2012, 10:40:18 PM
Opps, sorry, 3 pin.

Jason

jaak

#3
May 06, 2012, 08:38:06 AM
Found some on eBay. Heck you can get a whole harness at Classic Industries for about 14 more bucks. Probably go that route.

Jason

John_Kunkel

#4
May 06, 2012, 04:13:07 PM

There are two different 3-prong switch pigtails, the '78 and later switch has shorter pins so the pigtail is different and won't stay put on a '77 or earlier switch.
Pardon me but my karma just ran over your dogma.

jaak

#5
May 06, 2012, 08:53:00 PM
Quote from: John_Kunkel on May 06, 2012, 04:13:07 PM

There are two different 3-prong switch pigtails, the '78 and later switch has shorter pins so the pigtail is different and won't stay put on a '77 or earlier switch.

Thanks John, I didn't know that.

Jason

John_Kunkel

#6
May 07, 2012, 05:17:09 PM

NSS on right is '78 and later, next to it is '68-'77.
Pardon me but my karma just ran over your dogma.
Print
Go Up Pages1
User actions