News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

I bought a bumper kit-where do they go??

Started by sixpack_sid, April 16, 2012, 10:03:25 AM

Previous topic - Next topic

sixpack_sid

I bought a bumper kit for my 68 charger. I am not sure where they all go. I have the ones installed along the inner fender and the top hood bumper, but am not sure where these others go. Can anyone help me out?
Thanks!
Sid
I have seen evil! I have seen horror!
I have seen the unholy maggots which feast in the dark recesses of the human soul!
I have seen all this. But until today, I have never seen such a pain in the ars car like this 68 Charger!

charger Downunder

Big round ones with hole front of hood adjusters.
Others try
Hood back corners mounted to body
Rear boot corners
rear number plate
glove box
ash tray
console
Headlight covers ?
[/quote]

gtx6970


Some of this , I have to admit, I am guessing


1= hood adjusters
2= 2 of them are for the decklid ( not sure of the other 2 )
3= console door ?
4= glovebox door ?
5= outer rear corners of the hood to fender near the cowl panel area
6= ashtray
7= trunk floor mounted fuel tank sending unit wire grommet

bill440rt

Bill looks like you got them, but I'm pretty sure #7 is for the license plate. And there should be two of them.  :yesnod:
"Strive for perfection in everything. Take the best that exists and make it better. If it doesn't exist, create it. Accept nothing nearly right or good enough." Sir Henry Rolls Royce