Can it be the same parts? AC parts

[bobfist]

Hi!
I have a friend with all parts for the AC set up
It comes from a 383 1970 and my car is a charger 69 440
I want to put all back on the engine as i came out from the factory
What parts are different these two years?

[gtx6970]

What parts are different these two years?

about all of it.
Hoses are model year specific
most of the brackets are engine size specific
compressor and pulleys will be the same though

[bobfist]

ok, the parts looks like this, i think the clutch feel on the compressor are different?
and i don't see the big plate installed on these picture on 69 compressors

Looks correct?

[bobfist]

someone?

[gtx6970]

looks like a mixture of parts maybe.

Rear compressor bracket is definitly not 69 - look like 67 - 68
It doesn't look like the 69 lines either , unless they're small block

pulleys might be right

I'll round up some 69 440 pictures

[gtx6970]

1969 440 only - rear compressor brackets

[gtx6970]

Shown - Idler is 1969 , 1970 not sure it newer is the same or not,
I do know 1968 and older is different

[gtx6970]

I have a lot of pictures posted here if you want to look thru them
http://www.dodgecharger.com/forum/index.php/topic,77307.0.html

[bobfist]

THanks for the answers!
Is it any idea to buy it and try to get the other parts?
Do you think the rubber hose was wrong?

The big bracket plate on the compressor does that looks right?

And the clutch wheel can be changed?

[gtx6970]

I'm not real sure but I think the ft a/c compressor bracket is small block( definitly not 69 bigblock)
Hose is definitly small block

[Just 6T9 CHGR]

The only things you should be able to use out of that lot is the condensor, W/P & crank pulleys, Idler pulley and the compressor itself.

Everything else is wrong for a '69 440 engine,....