Third gen 4 speed conversion

[WM23N1]

I won an auction on ebay for a 71 b body bench seat pistolgrip four speed shifter and rods and was wondering what all i will need for the conversion. I know about the bellhousing,hump, pedals and the obvious parts but im unsure about all the small parts. I figure someone here has done it and would know.

[Chryco Psycho]

http://www.cuda-challenger.com/cc/index.php?topic=5006.0

[mridolfo]

I have a bench seat hump if you need it. Some other parts you will need are the Z-bar, z-bar frame bracket,2 ball studs,  the pedel to z-bar rod, clutch fork and clutch fork rod. Mopar still sells the clutch fork and fork rod. P.g. Classic has a bunch of 4 speed parts.

WWW.pgclassic.com

[WM23N1]

I have a bench seat hump if you need it. Some other parts you will need are the Z-bar, z-bar frame bracket,2 ball studs,  the pedel to z-bar rod, clutch fork and clutch fork rod. Mopar still sells the clutch fork and fork rod. P.g. Classic has a bunch of 4 speed parts.

WWW.pgclassic.com

check your messages