Quarter Window Parts

[FrnkNsteen]

Hey guys,

   I was going through my quarter windows while my quarters were off, to replace all the slides and rollers. I noticed that the kits offered don't give you the little wedge shaped rubber bump stops that cushion when the window hits the bottom of its travel. They are the ones that wedge into the bent metal bracket that is bolted to the boomerang looking frame. Also wondering about the little rubber band looking thing that cushions the top stop.

Any ideas on where to get these rubber pieces??

Speaking of the boomerang looking frame in the quarter windows, I found that one of mine was cracked in the middle of the long run of the bottom roller. We were able to weld it, but I'm a little concerned of how strong it will be. It already cracked once again while grinding the first weld job, and it has a little wave to it. Anyone have one of these for the driver side? and will the ones out of any Bbody fit, or are they Charger specific??

[FrnkNsteen]

Wow!! Did I really stump the experts??  I've never seen that happen!! 

Seriously,..... any help anyone could provide would be greatly appreciated. If I don't find something, I may just have to come up with something that will do the same thing.

[gasoline_24]

I am not sure what wedge pieces you are referring to in the quarter windows, but mine had round rubber bumpers stretched over metal brackets.  I just used some rubber hose and cut new ones.  I cannot remember what size hose was used, but they work just as new.

[bull]

Parts are pretty scant when it comes to rear window hardware. I've seen many repair kits for them but none included the rubber pads.

[FrnkNsteen]

I am not sure what wedge pieces you are referring to in the quarter windows, but mine had round rubber bumpers stretched over metal brackets.  I just used some rubber hose and cut new ones.  I cannot remember what size hose was used, but they work just as new.

Yep, mine has those on the top stops. For the bottom of the travel, there's a bracket that bolts to the boomerang shaped frame that has a slot in it. On one side, I still had the split bumper that wedges into that slot, so at least I know what I'm looking for. May have to scrounge the different swap areas at shows until I find one. ...... or just find something else that will work. It's not like anyone will ever see it inside the quarter again.

It looks a lot like this (cad model image)

[tan top]

I am not sure what wedge pieces you are referring to in the quarter windows, but mine had round rubber bumpers stretched over metal brackets.  I just used some rubber hose and cut new ones.  I cannot remember what size hose was used, but they work just as new.

yeah , took me a while  , to think of something  , found these were  perfect !  just cut the rubber scocket things off one side & strech over the glass stop bracket

look at picture  , the capri pop out rear quarter glass  hinges  slide in to these !!  two in each B pillar ,  see green arrows !
also just found a picture of them on ebay  ,