Transmission cooler - B&M

[68-440]

I have seen recommendations posted here for the B&M stacked plate design.

Which of the 3 sizes did you get?

Did they include the proper size and type fillings to interface the 440 charger systems, or did you have to search for others?

Cooler efficiency rating
● 70255 rated at 9,800 BTU
● 70268 rated at 13,000 BTU
● 70264 rated at 14,400 BTU

Thank you

[flyinlow]

I have the 70266 Super cooler. Needs adaptors from 1/2 " npt to 3/8 flared lines. I have a 518 trans with a gauge in the pan. 150* normally, 180* on a hot day in traffic. I run it stand alone, so in the winter I block most of the airflow to  the cooler so the trans fluid will warm up.  I would recommend the cooler.

[68-440]

thank you for your reply.
I see you understood my typo:  fillings should be fittings.
flyinlow: I didn't see the 70266 on their website.  Where does it fall in the BTU range?

[Brass]

I got mine through Summit but according to Jegs, the 70266 has 20,500 BTU's. 

http://www.jegs.com/i/B-M/130/70266/10002/-1