News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Torsion Bar Cross member Measurement

Started by Ants, February 25, 2011, 11:07:55 AM

Previous topic - Next topic

Ants

Ok so i need a little help.

I'm replacing the Torsion Bar Cross Member, The new one needs a little finessing to get it right. After tacking it in i thought i should have made sure the trany mount would bolt up.

I don't have the trany mount, so i measured the holes from center to center but I'm getting two different measurements. The original was rusted out, and the new one needs work to make it fit, and until i get a trany mount can some one help out with the measurement?


This is what I'm measuring



NHCharger

What Year? I currently have the floors out of my 68 so i could grab a measurement for you tomorrow.
72 Charger- Base Model
68 Charger-R/T Clone
69 Charger Daytona clone
79 Lil Red Express - future money pit
88 Ramcharger 4x4- current money pit
55 Dodge Royal 2 door - wife's money pit
2014 RAM 2500HD Diesel

Ants

Quote from: NHCharger on February 26, 2011, 10:10:23 PM
What Year? I currently have the floors out of my 68 so i could grab a measurement for you tomorrow.

Oh damn, guess that would have helped. It's for my 68

NHCharger

8-7/16" center to center
20-5/16" center to center
72 Charger- Base Model
68 Charger-R/T Clone
69 Charger Daytona clone
79 Lil Red Express - future money pit
88 Ramcharger 4x4- current money pit
55 Dodge Royal 2 door - wife's money pit
2014 RAM 2500HD Diesel

Ants