spark plug wire clips

[charger Downunder]

Factory spark plug wire clips who sells the plastic piece with bigger holes to take larger leads eg 8mm. I am after the plastic piece that push onto the factory brackets to suit big block.

[gtx6970]

nobody,
you'll have to modifiy either the new ones or your originals

[charger Downunder]

Thanks Bill looks like i will have to use a round file to make my original ones larger.
Maybe this would be a good part for someone to make.

[gtx6970]

Thanks Bill looks like i will have to use a round file to make my original ones larger.
Maybe this would be a good part for someone to make.

it's been discussed, and is NOT going to happen, when it's to easy to just modify the ones already avail with about 10 minutes of work

[Just 6T9 CHGR]

I modified a second set from Bill to fit the FireCore 8mm wires I have for "race days"

[Chatt69chgr]

You are running the Firecore's on race days and then changing them out to stock for shows?

[Just 6T9 CHGR]

You are running the Firecore's on race days and then changing them out to stock for shows?

Yup.....I have a second cap all wired up with the retainers left on the wires....10-15 min job

[Khyron]

I used Chevy looms... advanced auto $35, a Grinder, and some time and did this.... I'm never liked wires in the engine compartment and have spent a lot of time, and still am spending time cleaning them up, thi sis the first time i've ever been happy with my setup.

[Hemidog]

Hey Khyron, that looks really good.
Do you have a link to those looms? And where did you get the wires that seems like a perfect fit? cut to fit wires?

[Ronnman]

Summit - http://www.summitracing.com/parts/RNM-1104P/
Ron