Is this balancer on all the way?

[bull]

I guess I half expected the front of the balancer to be flush with the front of the crank but there's about an 1/8" gap. I set my torque wrench to 135 ft. lbs. and it clicked when it got to this spot. Is it on far enough? Apparently the bolt bottomed out but I don't know that for sure.

[Rayzor]

Looks the same as the one on my 440 sitting on the stand.  Might try stacking another washer on the bolt and see if it will run down further, but I doubt it.

[Rolling_Thunder]

that should be good to go - As far as I know they do not go all the way flush

[Al]

Mine looks exactly the same on my 383.

[bull]

That must be it then. Thanks for the help guys.