News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Speedometer going out in 3rd Gen

Started by quentin, December 21, 2009, 12:11:53 PM

Previous topic - Next topic

quentin

Today I decided that my '73 charger was running well enough to commute to work in for the first time.  During my commute, the speedometer started acting flakey and I could hear a distinct sound under the dash that sounded like gears slipping.  When they slipped, the speedometer would shoot up in MPH.

Can anyone help me narrow down the issue, and the strategy for fixing it?

THANKS!
'73 SE, 400, 4 barrel with 3 on the tree

Nacho-RT74

oiling the wire and maybe to the speedo hole itself... I will deal with that pretty soon. Got a noise when running between 20 to 30 MPH since a week ago
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

lisiecki1

if it turns out that the speedo is going out and you have a ralley dash I have one i'll sell you.....i also have the complete "standard" dash for the car....working when it was removed 8 years ago.
Remember the average response time to a 911 call is over 4 minutes.

The average response time of a 357 magnum is 1400 FPS.

http://www.dodgecharger.com/forum/index.php/topic,52527.0.html

b5blue

When they go it is not pretty, I was 100 miles from my new Air Force base when mine (in a landcruiser) did what yours is doing for about 10-15 miles then bound up and spun like a fan doing 360's till it let out a sqweel and snapped dead hanging limp in the dash!  :o I would unhook it at the back of the speedo and pull the cable out if you can.

268RTs4ME

First unhook your speedometer housing off the back of speedo head and then with needle nose pull the wire cable out of housing, check it for bad places, if none, clean it and then lube it with white litheum grease, lots of times a lube job is all it takes>

quentin

Thanks everyone!  On the way home, it actually worked flawlessly.  But I think it's telling me to get ready.  I will do some proactive maintenance.

'73 SE, 400, 4 barrel with 3 on the tree

NHCharger

72 Charger- Base Model
68 Charger-R/T Clone
69 Charger Daytona clone- current moneypit
79 Lil Red Express - future moneypit
88 Ramcharger 4x4-moneypit in waiting
2014 RAM 2500HD Diesel