News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

3rd, gen door jamb switch

Started by AZMoparboy, November 29, 2009, 08:22:37 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

AZMoparboy

November 29, 2009, 08:22:37 PM
Hi again,

Still working on small things to finish up the charger and have come on another parts problem. I went to the parts store this weekend and got thedrivers side jamb switch, got home, started to install it and was the wrong one. It seams that my Charger has 1/2" holes for the switches. Is this something anyone else has come across. None of the switches that the parts store have will fit :'(. I hope someone will help with a part numbers and or a place to get one :yesnod: I need the drivers side only and has two prongs.

Steve

Nacho-RT74

#1
November 29, 2009, 08:46:25 PM
mmm... I remove mines with 9/16" wrench
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

Nacho-RT74

#2
November 29, 2009, 08:54:08 PM
PN 2947844
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

AZMoparboy

#3
November 30, 2009, 08:56:14 AM
Hi Nacho,

Thanks so very much. I see that there is a good used switch on ebay and I'm going to bid on it. If I don't get it then will just keep trying now that I have a good part number.

Your the best, Dude,
Steve
Print
Go Up Pages1
User actions