News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Tach Hook Up - 74 Charger

Started by dvnen, May 15, 2009, 10:21:37 AM

Previous topic - Next topic

dvnen

I am looking to install a tach on my 74 charger (electronic ignition) , but I don't have the instructions to hook it up.  Studip question but where would the tach wire get its feed from - the negative on the coil?  Thanks..


Ghoste

If you are talking about a factory style tach then yes, from the negative on the coil.

Nacho-RT74

http://wichargerguy.proboards.com/index.cgi?board=electrical&action=display&thread=4454&page=1

yes, - lead of coil what is the ECU sends the pulse signal to close circuit to coil and make the spark ( same than on points system )
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html