News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

73 front floor pan

Started by Moparbob, April 12, 2009, 09:19:28 AM

Previous topic - Next topic

Moparbob

Hi,

Although I dont really need it I would like to replace the drain area of my front drivers side floor pan. It seems pretty thin after doing its job for 30 something years. Anybody make a patch panel just for that area or do I need to buy a front pan somewhere and cut out what I need?

Also who sells these.

Thanks!
Bob Norris
www.moparbob.com

God Bless America.

Beer

I used

http://www.autobodyspecialt.com/ the Drivers side $72 one.  It was a good fit, the rockers from them sucked though.






to

1973 Dodge Charger 402 Stroker Smallblock 414 HP/ 466 ft/lbs torque,  8 3/4" 3.91 Suregrip rear w/ DR. Diff disk brake conversion, CalTracs single leaf and Rear Suspension, VFN Bulge Hood, Running, needs interior completed, Had to give to Ex-Wife in divorce 2017...

Moparbob

Nice,

I just need to cut out the drain area about an inch around, the rest of the pan is 100%. The passengers side is fine.
Bob Norris
www.moparbob.com

God Bless America.