Axle preload

[squeakfinder]

I've just installed a different third member in my 8 3/4 rearend. Also had new roller bearings installed on the axles. I adjusted the passenger side to zero end play and tapped the driver side axle in with a hammer and then backed the adjuster nut off on the passenger side. I have very little play on the passenger side but the driver side seems excessive to me and there appears to be no way to correct it. Is this normal? The thrust buttons are installed.

[squeakfinder]

Nevermind guys. I just had to think about it a little longer. I was turning the adjuster the wrong way.

Man do I feel stupid. 

Mods if you want to delete this thread feel free.....