News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Under Hood Pic if wiring

Started by Moparbob, November 27, 2008, 09:11:07 AM

Previous topic - Next topic

Moparbob

Hey,

Anybody have an under the hood pic of how the engine wiring is laid out on a 73 charger? I have a charge, a big block, a box of wiring and some gadgets and do dads, id like to see how they are supposed to lay out. 
Bob Norris
www.moparbob.com

God Bless America.

Beer

Mine is a Smallblock, but here is what I got so far

Pass side


Electronic ignition, and Blower motor (Green Wire of the engine harness to blower motor, not sure were the ground wire goes exactly on the blower motor)





Voltage regulator and ballast resister



Alternator




Brown to the Windshield solvent pump Then what I have left over the cone shaped wire goes to the brake proportioner. the other I am unsure of (Double blue wire plug)
1973 Dodge Charger 402 Stroker Smallblock 414 HP/ 466 ft/lbs torque,  8 3/4" 3.91 Suregrip rear w/ DR. Diff disk brake conversion, CalTracs single leaf and Rear Suspension, VFN Bulge Hood, Running, needs interior completed, Had to give to Ex-Wife in divorce 2017...

Moparbob

Bob Norris
www.moparbob.com

God Bless America.

Bob

Quote from: Moparbob on November 27, 2008, 09:11:07 AM
Hey,

Anybody have an under the hood pic of how the engine wiring is laid out on a 73 charger? I have a charge, a big block, a box of wiring and some gadgets and do dads, id like to see how they are supposed to lay out. 

Hope this helps with the ignition a little.
Compliments of Nacho.


Nacho-RT74

thats a 72 diagram... works more less the same to 73, with washer reservor exception ( diff location on engine bay )
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

Bob

Quote from: Nacho-RT74 on December 01, 2008, 12:56:37 PM
thats a 72 diagram... works more less the same to 73, with washer reservor exception ( diff location on engine bay )
Uh..I knew that.....just seeing if your awake......

I thought it was a 74. Sorry.
Bob

Bob

Quote from: Bob on December 01, 2008, 12:58:21 PM
Quote from: Nacho-RT74 on December 01, 2008, 12:56:37 PM
thats a 72 diagram... works more less the same to 73, with washer reservor exception ( diff location on engine bay )
Uh..I knew that.....just seeing if your awake......

I thought it was a 74. Sorry. Interlock missing.
Bob

Nacho-RT74

and maybe some wires also turned around on plug ;D
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html