News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Torsion bar crossmember removal?

Started by Truebelieverone, September 01, 2008, 02:11:07 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Truebelieverone

September 01, 2008, 02:11:07 PM
 My crossmember is in BAD shape and needs to be replaced. I know AMD has repos but I've found a  66 charger in a local junkyard that has a good solid one in it. I have a blair spotweld cutter that I'm going to chuck in a battery powered drill. Any tips on getting this thing out?

69hemi

#1
September 02, 2008, 01:17:12 PM
Score a battery powered Sawzall and just trim it out then do the spotweld cutting at home.  Way mo easier!!!
http://www.69hemi.com
1969 Hemi R/T Charger
1969 440 GTX
1965 Hemi A/FX Plymouth
1964 Hemi Superstock Dodge
02 Ram
95 Ram

Truebelieverone

#2
September 02, 2008, 06:19:24 PM
Quote from: 69hemi on September 02, 2008, 01:17:12 PM
Score a battery powered Sawzall and just trim it out then do the spotweld cutting at home.  Way mo easier!!!
Lmao, I figured that out the hard way today. I kind of thought I was outmatched with the tools I took out there. The car is suspended at all four corners, is it going to cause a problem if I cut through the rockers and floor to get it out? Or should I try to stay inside of the rockers? My friend is going to let me borrow his battery powered sawzall so I'll give it another whirl this weekend hopefully. Thanks for the reply btw.
Print
Go Up Pages1
User actions