Front Wheel studs 1967-69 WITH disc brakes

[gtx6970]

Anyone have a pic of an original wheel stud for the 4 piston disc brakes rotor - fronts only please, either side will work.
I have a setup to confirm ,I just didn't want to pull it apart if I didn't have to.

Just trying to confirm something

[Dentbusters]

Bill,
I have to press mine out to switch to the new set of rotors I bought off ebay. I will press them out possibley today. I think I told you I need one stud, as one of the lh threaded ones was broken off.
Travis

[gtx6970]

Thanks Travis,
I have set up I could press the stud out of if I had to, problem is it's kinda buried in the shed.
Here is a pic I took of what I have so far.
My brother called me last week to let me know that all left hand wheel studs are being dis-continued from the manufacturer. I bought every single one of the 67-69 Ft studs avail that fit the disc brake rotors in both lefts and rights. I did get a little over 130 FT left hand studs and about 100 rights, so I may have them for a while . But  I just couldn't let them vanish without a fight.

I have the 1970-71 Ft disc rotor left hand studs coming, (he's rounding them all up from multiple store  locations )

The left hand rears are dis-continued  to ,but seem to be  more plentiful so I didn't get as many of them.

11" drum front wheel studs are being dis-continued as well. I'll have all those soon.

Bill

[SpudRacer]

Anyone know where to get L/H rear wheel studs for 8-3/4 10" drums, and L/H studs for front discs for a 69 R/T?

Thanks,

Tom
Bryson City, NC

[y3chargerrt]

Most parts house can't get lh studs anymore. I ended converting to rh.