74 charger trim piece removal

[rudyjrusa]

how do you get this piece off??  it is not a screw or nut.  how do i take this off??  any suggestions would help.  i would like to paint this piece and put it back.. once i take off piece - can i put it back with same metal piece??  thanks

[Nacho-RT74]

is that the B pillar area right ?... I see a phillips screw there. Some worn but definitelly a screw.

On Parts catalog that piece looks attached with screws too. I think they are 3.

HOWEVER also see a rivet... if so, probably somebody attached that with rivets in the past, so would it need a drill to cut the rivet.

I never have seen an SE personally, just compairting with the Parts catalog, so REALLY dunno where must be loosen

[Charger1973]

Those rivets are easy to break.  There is no re-using it.  If you dont want to drill it just slip a flathead screwdriver under it and it will pop apart.  (Be careful not to damage your parts, and only put the screwdriver under the rivet NOT the part).

[rudyjrusa]

Those rivets are easy to break.  There is no re-using it.  If you dont want to drill it just slip a flathead screwdriver under it and it will pop apart.  (Be careful not to damage your parts, and only put the screwdriver under the rivet NOT the part).

thanks - i will try it tomorrow. 

[chgr500]

Take a punch and knock the centre stem of the rivet out...it'lll make it much easier..