Is this a Hemi Booster??

[lilwendal]

I just won this on Ebay and was wondering if anyone could tell from these pics if it is a hemi booster or a regular Power disc booster?  I know the hemis took larger mounting bolts and also the angled input lever to the booster I just cant tell from the pics. Can anyone tell for sure by the pics I remember once being told the 67 B bodies could also have the extra brackets to raise the booster but I've not seen it.
Thanks in advance for the wisdom.

[lilwendal]

The brake lines coming off to the engine side make me think non hemi. At least for the master.

[Just 6T9 CHGR]

I believe 2 discerning factors are 3/8" mounting studs and they are offset as well

[CHARGERMAN2007_69]

i know from the bracket to bolt to the firewall its for an a body  unless they used em on b bobies but i doubt it

[lilwendal]

It was advertised as removed from a 67 hemi coronet. I guess when it arrives I'll know for sure.  The input rod lengths are different.
I believe Dewey Booster can swap out the rods during rebuilt if its not a B body rod.

[CHARGERMAN2007_69]

I think it is an a body man wat did u give for it

[lilwendal]

200.00 So would that be a big block  A body or did all power disc brake A bodies get the elevated booster?   You would hink  on an A body it would put it too close to the hood.
I know 200.00 is agood price for a B body booster but did I pay too much for an  A body   The only difference is the inputrod right?

[Just 6T9 CHGR]

That does look like a Hemi bracket set up IMHO.  A-Bodies never had the dual diaphragm Bendix booster.

Looks like Dr. Diff sells new Hemi brackets for use on orig Hemi boosters as well as the standard ones...

http://board.moparts.org/ubbthreads/showflat.php?Cat=0&Number=4404103&Main=4403313

[lilwendal]

OK...Then Whats this booster from???

[Just 6T9 CHGR]

Does it have 3/8" studs?

[lilwendal]

Has not arrived yet.  That will be the definite factor when it arrives.  I was just curious  if anyone could tell by whats pictured. Did any other Bendix set ups use the offset bracket?

[gtx6970]

3/8" studs on the back of it will be Hemi only, I think

Other wise it's 1967 B-body

[70Bird]

When looking at the booster, I noticed there are no spacers between the booster and the bracket. Does each side of the bracket have to small holes. I have an original hemi booster and offset bracket, if you snap some more pics, I could tell you for sure.  John