News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Driveshaft Question

Started by CornDogsCharger, March 02, 2008, 10:38:50 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

CornDogsCharger

March 02, 2008, 10:38:50 PM
I guess this is the appropriate section for this question.  I have a 69 Charger that came with two driveshafts... one long... and one shorter.  The car originaly had a 383 and 727 (which are currently out of the vehicle).  Which one goes with my car... long or short driveshaft?  I know it may sound like a stupid question.  Thanks

Justin
"CornDog"
1966 Dodge Charger
1969 Dodge Charger (DMCL Project)
1969 Dodge Charger (WB General Lee "GL#004")
1969 Dodge Super Bee

Ghoste

#1
March 03, 2008, 04:49:56 AM
If you are using an 8.75 rearend, the drivesahft that's 52 inches long is the one you need.

Chatt69chgr

#2
March 03, 2008, 03:43:17 PM
And I believe you measure it from the centerline of the front yoke to the centerline of the rear yoke. 
Print
Go Up Pages1
User actions