dana u joint

[gordo1968charger]

i m taking my driveshaft to a local(70 miles away) driveshaft clinic,to get shortened and fit a  new slip yolk(for the gear vendors) and a new u joint to fit the strange dana,what size u joint do i need?i presume its a 1350 pinion yolk,although i could be wrong.
thanks in advance for your help
gordo

[BrianShaughnessy]

What U joint did you order the Strange dana with?    1350 or 7290?    Better get it right because nobody makes a 1350 to 7290 conversion U joint.


By looking at their advertisement... we can see that the S60 comes with 1350 u joints as advertised....  that's what I suspect you may have. 
http://www.strangeengineering.net/newprod/2006/MoparAction.html

What does this mean to you?   In all honestly you should probably just order a new 1350 / 1350 driveshaft from Denny's or one of the other suppliers.   You need another yoke on the rear of the driveshaft along with the front slip yoke.   

[gordo1968charger]

i was going to get local company to do it just as a speed thing but i ve read strange have a 1 week turnaround,so.....i ll have a rethink.