News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Drive shaft 68Charger 383 Auto

Started by my1st68charger, September 29, 2009, 08:17:14 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

my1st68charger

September 29, 2009, 08:17:14 PM
Need some help on finding a driveshaft for my 68 charger 383 auto 3:23 8-3/4 rearend ,around what length would that be? :shruggy:

Corellian Corvette

#1
September 30, 2009, 10:58:54 PM
Find a local shop to make one for you. It's not more expensive, it'll be balanced properly, and it will be right for your car.

The driveshaft shop can tell you how to take the measurements. Has to be done with weight on the car, but otherwise pretty straightforward...

Ghoste

#2
September 30, 2009, 11:03:41 PM
It'll be just slightly over 52 inches.

62 Max

#3
October 01, 2009, 08:11:40 AM
Just what you  need

my1st68charger

#4
October 01, 2009, 04:34:47 PM
wow thats nice!!

my1st68charger

#5
October 01, 2009, 04:37:12 PM
Quote from: Ghoste on September 30, 2009, 11:03:41 PM
It'll be just slightly over 52 inches.
From weld to weld or??

Ghoste

#6
October 01, 2009, 06:21:06 PM
From the center of one yoke to the center of the other.  (and by center I mean the circular portion that retains the u-joint)
Print
Go Up Pages1
User actions