Searching for pics of Charger concept car

[professor-patrick]

I vaguely remember seeing a picture in a magazine some time ago of a 68, 69 or 70 Charger that was made into a concept roadster (no top), had dual fuel fillers, and some other mods. Anyone have images of that car or information?  Thanks.

[Brock Samson]

the Supercharger several threads...

[Brock Samson]

tons of pics...



hey is it me or does one fender mounted scoop look considerably different from the other?..



http://www.dodgecharger.com/forum/index.php/topic,1369.0.html

http://www.dodgecharger.com/forum/index.php/topic,18442.0.html

http://www.dodgecharger.com/forum/index.php/topic,21104.0.html

[WingCharger]

the Supercharger several threads...

That is AWESOME!

[Brock Samson]

wait, don't tell me,.. now your gonna clone it... 

[tan top]

 read somewhere its still real low miles ....   intresting  concept but  ... someone should put a roof back on it & turn it back into a proper 68 R/T     

[WingCharger]

wait, don't tell me,.. now your gonna clone it... 

Nah..I couldnt do justice to a car like that. Too much fiberglass filling in the rear seat,:buff: making the nose seamless, etc. etc.
I think it is strange the cut down windshield. Never seen something like that.


Looks good from above, weird eye level though.

[triple_green]

I want one...

[elanmars]

now that truly looks like a boat on wheels.

[71ChallengeHer]

I have a piece off the fender of that car. The fenders were solid putty to get the shape. About 1/2 in. thick. The body shop I use to work for restored it.

[professor-patrick]

Thanks everyone - I knew there were lots of pics out there.  I'm not going to clone it, but I have a customer that wants a roadster Charger, and I have one that needs every piece of sheetmetal, including a top, so I'm going to do something different.  Basically using a 70 body (minus hood, fenders, quarters, tailpanel, and top), I'm going to use a 68 front and tailpanel, cut to top off, keep the backseat unlike the supercharger, leave the windshield full height, lose the vent windows (and all other glass too), seriously reinforce the frame (subframes and x-bracing), etc.  The idea is to make it look like it came from the factory, so other than that, the interior and engine bay will look stock.  I've built 21 chargers over the last 4 years, it's time for something different.  Hope to get started in a month or so when a spot opens up in the shop.  Follow along at www.scotleaidolrods.com.  Thanks again.