Running lean, could it be the Cam?

[cudaken]

 I was talking with 41 Husk and something popped in to my head.

This cam is ment to be ran with a blower and specks are a little odd.

Duration @ 0.500 is 218 intake and 228 exhaust, lift is 0.461 intake and 0.480 exhaust and lop center 114.0 @ cam over lap is 50.6. Intake is a stock 72 intake and holley 750.

With the exhaust having more lift and more duration, would that cause the 440 to run a little leaner? Stock intake woul not help either. Heads valves are 2.14 and 1.810

                         Cuda Ken

[firefighter3931]

That cam is specced close to the factory Hp cam which had a large split between the intake and exhaust and was ground on an even wider 115* lsa. The cam isn't causing overheating issues....there's a vacuum leak or the carb is jetted too lean. Retarded timing will also cause the hot exhaust as previously mentioned.

Ron