News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

3rd Gen Rallye cluster... need a little help with the wiring

Started by Charger1973, August 19, 2007, 08:29:36 PM

Previous topic - Next topic

Charger1973

Ok I have 2 questions.  One is the tach.  I dont have any wiring in my car and need to make it from scratch which is no big deal but I dont know what goes where.   :shruggy:

The second is the 4 wires shown, the cluster is marked gray and blue and then theres 2 wires that come from the voltage limiter next to them.  I have them opposite in the picture because thats how they were on my standard cluster.  I think I should switch them but was hoping someone could tell me for sure one way or the other. 

Charger1973

Ok so after zooming in and studying this blurry pic, it looks like the top post goes to the yellow accessory plug and the bottom spade connects to the fuse box?  Im assuming that wire needs to be run to the coil though.  Am I on the right track? 

Nacho-RT74

bullet terminal to accesories feed. spade terminal to bulkhead, not fusebox, and then run to - lead of coil throught engine harness

gauges wires... works on both ways since is just a negative and positive on a internal coil causing short and heating a bimetalic what moves the needle , but better get it right. Color to the labeled and black coming from limiter to the non labeled
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

Charger1973