engine torque strap

[sean68charger]

has any one got any pics/where/what used for a torque strap for a 440 with power steering in a charger, to protect the drivers engine mount from being ripped apart?

[Just 6T9 CHGR]

I used the strap that Schumacher Creative solutions sells.

http://engine-swaps.com/

[firefighter3931]

No torque strap needed  ......here's how to make the driver side mount bulletproof :


http://www.dodgecharger.com/forum/index.php/topic,13216.0.html



Ron

[sean68charger]

thanks, interesting

[andy74]

No torque strap needed  ......here's how to make the driver side mount bulletproof :


http://www.dodgecharger.com/forum/index.php/topic,13216.0.html



Ron

works just like ron says too,havent had a problem yet,been over a year and quite a few full throttle starts!

[no318]

I used the strap that Schumacher Creative solutions sells.

http://engine-swaps.com/

I went this route also.  NO problems with it.

[Mefirst]

Or if you want to be "Hardcore" you go with Elephant ears...




/Tom

[Charger1973]

Has anyone ever broken a 73+ spool type mount?  What upgrades are available to them? 

[Charger-Bodie]

spool mounts are too cool for school!!! no seriosly they are the best mount chrysler ever made imo about all you coul do to im proove them is better rubber or thicker metal ......the design is great!

[Charger74]

spool mounts are too cool for school!!! no seriosly they are the best mount chrysler ever made imo about all you coul do to im proove them is better rubber or thicker metal ......the design is great!

\


Unless you break your bolt.  And yes, I've seen it happen on a friends car.