68 charger brake booster question

[chargerman68]

have  an edelbrock intake with the fitting in the back for the brake booster check valve.question is what kind of fitting would work in the line too the intake

[Chatt69chgr]

Are you wanting to know what kind of fitting to use in the intake manifold (behind the carb?) to connect the hose coming from the brake booster check valve?  If so, 6T9 Charger used what I would call a vacuum tree that had one big hose fitting on the top and multiple little hose fittings coming out the sides.  Unused ones had little rubber plugs on the ends.  I have not found a source for these new but they can be found on 70's C bodys.  Sorry if I didn't answer your question correctly.  If so, could you elaborate more on what you need to know.  Thanks.

[chargerman68]

just need to know what fitting goes into the carb behind the carb.found a new check valve for the booster just need the fitting for the intake side,thanks

[Just 6T9 CHGR]

This is the fitting you will need

http://cgi.ebay.com/ebaymotors/Mopar-Dual-Port-Vacuum-Intake-Fitting-N96-Air-Grabber_W0QQcmdZViewItemQQcategoryZ10076QQihZ014QQitemZ330116756713QQrdZ1QQsspagenameZWDVW

[chargerman68]

thanks for the help,any chance i could find it at an auto parts store if i dont win this auction.

[Just 6T9 CHGR]

Im sure something can be made up using brass fittings from Home Depot or an auto parts store

[chargerman68]

what does the 45 fitting off the side go too?

[HITMAN 149]

NOT that i would know or anything!!! but it looks like a bong!!!! LOL!!!!!!!!

[Just 6T9 CHGR]

what does the 45 fitting off the side go too?

Headlight vacuum canister.

Orig equipped A/C Chargers would have a 3rd nipple for the HVAC door vacuum under the dash

[chargerman68]

thanks for the help guys...

[resq302]

Just so you know, there are different sized nipples that go off on the angle.  The one I got was for a N96 air grabber hood as the nipple and vacuum hose was thinner than what the supply hose to the vacuum canister on the charger is.  All I did was to cut off the thinner tube and drilled out the hole and took some brake line with the flare on the end and bent it to shape and used some JB weld to hold it in there.  Works like a charm and you can't tell the difference.

[Just 6T9 CHGR]

Just so you know, there are different sized nipples that go off on the angle. The one I got was for a N96 air grabber hood as the nipple and vacuum hose was thinner than what the supply hose to the vacuum canister on the charger is. All I did was to cut off the thinner tube and drilled out the hole and took some brake line with the flare on the end and bent it to shape and used some JB weld to hold it in there. Works like a charm and you can't tell the difference.

Ah ha!!!!   The non stock item!  muhhahah!

[resq302]

no that wasn't the item I was referring to in the other posting.....   I am sure you know what it is too.