Will tilt steering from '75-'79 Cordoba/Charger fit?

[TruckDriver]

Will tilt a steering column from '75-'79 Cordoba and or Charger work in a '72 Charger? I would like to try that in mine if they will.

[no318]

Don't think so.  71-72 should interchange, I think.  73 up have rubber mounts under k frame.  73 is by itself.  74 is different.  Don't know about 75 up.

[hemihead]

Try a search here on this topic, I believe this was covered. Or maybe on the old forum.

[Charger1973]

Yeah I would like to know too.  73 might be more likely to work than 71/72.  I want to be able to put headers in without too much trouble though and I already know thats supposedly a problem with the 73 column.  SO swapping them could possibly even help my cause.  I dont know without looking into it more though. 

[no318]

I just swapped one in a 73 roadrunner and after getting a hold of 3 wrong ones, I have pretty much decided that 73 is all by itself.  The bolt pattern of the plate that bolts to the firewall is different.  I know that I had one out of a 74 that would not work and I think one was a 71-72 style.  73 has the rubber rag joint style connector at the steering gear.

[TruckDriver]

I had this same question posted at Moparts, and got this answer. But if anyone knows about the Cordobas, I'd still like to know.

"Try 1971-72 C-body as they have the same parts as the 71-2 B-body cars. You can shorten length of shaft and the column mount should be the same. If you have a 1972 dealers parts book, it shows both model cars in the tilt columns together."