News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Front Suspension tools

Started by pb24, November 07, 2006, 10:17:04 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

pb24

November 07, 2006, 10:17:04 PM
I'm getting ready to do the front suspension on my 68 charger. Is it necessary to have the specialty tools to do the job.

Chryco Psycho

#1
November 08, 2006, 01:33:16 AM
not nessisary , but to remove the control arm bushings you need a press or the tools to do it , or make your own tool

73 Charger 440

#2
November 08, 2006, 06:47:24 AM
I know for 3rd gens at least you need a tool to remove the balljoints...

Shakey

#3
November 08, 2006, 07:20:23 AM
If they weren't needed, they wouldn't make them.   :yesnod:

Chryco Psycho

#4
November 09, 2006, 03:36:19 PM
upper ball joints thread into the control arm & yes you need the socket to remove or install them 
Print
Go Up Pages1
User actions