SIDE VEIW OF NOSE TO FENDER SEAL WANTED

[daytonalo]

I'm mocking up my daytona nose and would apprecate a few photos of side view, and bottom view and need to know where the seal ends at the valence area . Larry

[Daytona R/T SE]

Couple I swiped off the 'net:

[62 Max]

Make sure you don't get them on backwards,that is possible.If you do your nose will stick out.

[daytonalo]

Perfect, those are perfect shots , I came up with a much cleaner fitting and cleaner looking seal on daytona . The nose to fender gap is 3/8 , much tighter than the origanal cars ! will post pix very shortly.                                                                             Larry

[daytonalo]

One more Q , does the back edge of the valence sit on top or go under the rad support ledge ?

[hemigeno]

One more Q , does the back edge of the valence sit on top or go under the rad support ledge ?

Does this pic help?  It's an old one, but my digital cam isn't handy so it's the best I can do.

[hemigeno]

One more of the seals from the bottom side.  They didn't worry about overspray much on those seals, did they?   

[daytonalo]

thank you

[daytonalo]

On a real daytona , is the lower rad support body color  or black ?

[62 Max]

Body color

[BigBlockSam]

thanks for the pictures, they went right into my daytona project file . Rene

[daytonalo]

So on a regular b-body they must be black , right ?

[Troy]

Couple I swiped off the 'net:

Heh, I was just looking for pictures and realized that I took that first one...

Troy

[Daytona R/T SE]

Couple I swiped off the 'net:

Heh, I was just looking for pictures and realized that I took that first one...

Troy

It's a small world, after all