News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

'72 Heater Hoses???

Started by TruckDriver, May 31, 2006, 01:49:14 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

TruckDriver

May 31, 2006, 01:49:14 PM
Is 1/2 inch the correct size for a 400? Because thats what was on my car when I got it, that is what I bought to replace the old hoses, but I can't get the new hoses to fit back on the heater core. I tried everything to get them to slid on, but all I am doing is tearing up the inside of the hose. What gives ???
PETE

My Dad taught me about TIME TRAVEL.
"If you don't straighten up, I'm going to knock you into the middle of next week!" :P

RD

#1
May 31, 2006, 03:17:06 PM
it is either 5/8" or 3/4" pete.  just measure your inlet/outlet on your water pump housing (outside diameter) and gauge it from there.
67 Plymouth Barracuda, 69 Plymouth Barracuda, 73 Charger SE, 75 D100, 80 Sno-Commander

John_Kunkel

#2
May 31, 2006, 03:44:58 PM
The hot water supply should be 1/2" and the return should be 5/8".
Pardon me but my karma just ran over your dogma.

TruckDriver

#3
May 31, 2006, 04:59:11 PM
Quote from: John_Kunkel on May 31, 2006, 03:44:58 PM
The hot water supply should be 1/2" and the return should be 5/8".

They both look the same size though. And, which one is which?
PETE

My Dad taught me about TIME TRAVEL.
"If you don't straighten up, I'm going to knock you into the middle of next week!" :P

Nacho-RT74

#4
May 31, 2006, 11:53:50 PM
not sure about that... I'll search for info
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html
Print
Go Up Pages1
User actions