68 Charger Headliner edge trims

[DanPratt]

Hi all, I'm in Australia building my 68 Charger and I don't have access to many parts yards around here.  My car came with the interior mostly in the boot.  I say "mostly" because I'm discovering now just how many parts I don't have as I start planning on how I will get this car back together.

Does anyone out there know of a reproduction supplier for the interior edge trims.  At this stage I think I need those that cover the sides of the headliner and the front above the windscreen as well as everything around the back glass.  In fact, about the only plastic part I seem to have is the cover for each of the front pillars.

Thanks for any help!

Dan

[70 sublime]

The sides and at the windshield are metal parts
The back window area are the only plastic parts

You might have to get the metal stuff from another car

No I do not know who might reproduce the pieces you need but someone else may

[DanPratt]

Thanks for the reply.  I have found a couple of reproduction suppliers for the back window trims.  I have ordered parts from a wrecker in the US while back and that process went pretty well.  So I might try them again for those front and side metal trims.

Thanks again!

Dan