Indy Crate Hemi

[6970Charger]

I can't find any recent/current reviews of Indy Crate Hemis. Most reviews are from years ago. Has anyone bought in the last year or two? Or know someone that has.
Looking for basically a stock 426 Hemi build. Maybe a couple of extra horses! 
Thoughts/comments.
thanks

[cdr]

I can't find any recent/current reviews of Indy Crate Hemis. Most reviews are from years ago. Has anyone bought in the last year or two? Or know someone that has.
Looking for basically a stock 426 Hemi build. Maybe a couple of extra horses! 
Thoughts/comments.
thanks

They have new owners, they know what they are doing !!!!

[6970Charger]

Thanks CDR, was hoping for a few more replies. Its a bit of money to spend! I don't want to have any regrets.

[cdr]

might as well build a mild 472 stroker, same cost, will be MUCH more fun 

[cdr]

if you dont have a hemi flywheel or flex plate [ 8 bolt] crank, get a 6 bolt crank for the build

[6970Charger]

Thanks CDR for the replies, I've got the flywheel, bell housing, the numbers matching 4 spd and dana. Going day 2 with this one, rims and headers. Was thinking about the 472, looks like it will fit under the hood. Thanks again!

[Ryan]

I can't find any recent/current reviews of Indy Crate Hemis. Most reviews are from years ago. Has anyone bought in the last year or two? Or know someone that has.
Looking for basically a stock 426 Hemi build. Maybe a couple of extra horses! 
Thoughts/comments.
thanks

while i have zero experience with indy i can say i had an excellent experience with Tim @ FHO https://forhemisonly.com/
he greatly exceeded my expectations and would highly recommend him.

[Q5XX29]

I can't find any recent/current reviews of Indy Crate Hemis. Most reviews are from years ago. Has anyone bought in the last year or two? Or know someone that has.
Looking for basically a stock 426 Hemi build. Maybe a couple of extra horses! 
Thoughts/comments.
thanks

while i have zero experience with indy i can say i had an excellent experience with Tim @ FHO https://forhemisonly.com/
he greatly exceeded my expectations and would highly recommend him.

I can attest to the phenomenal engines Tim (FHO) builds, too. Two of my cars are running his stroker Hemis (a 572 and a 604).  Buuuuttt,  not going get into one of his as cheaply, I suspect. But as they say, quality is remembered long after the cost is forgotten!

[6970Charger]

Thanks Ryan and Q5XX29 for the replies. Spoke to a shop on Friday that had dealt with a few customer cars that had a FHO hemis and nothing but good things to say. Q5XX29, very true. Its better to spend the money once than have to do it a second time. I'll give Tim a call this week and get more details, time lines and a cost before I decide. A few vintage complete motors are popping up too!