quick help

[MadScientist]

Hi all,

Could someone tell me how to remove the reverse light indicator wire from the inside of the bulkhead connector?  Id rather not have to cut it.

thx

MS

[mikepmcs]

should be able to put a small strightslot in there and push the little lock tab down and jimmy the wire out. i'll run out and take a pic of it for you.
give me a few
Mike

[mikepmcs]

here you go if it's the same kind of connector in theory it should work quite the same way.
stick the scredriver in the slot on the bulkhead disconnect and push that tab down.
good luck
Mike

[MadScientist]

great!  Thats what I thought, but I wasnt sure about the side to put the driver on.  Ill let you know how it goes!

MS